3xLOGIC VIGIL Client - Manual (Page 51)

3xLOGIC’s VIGIL Client - Users Guide Page 51
Doc# 12031914
9 Digital Virtual Switch
The Digital Virtual Switch feature allows users to configure additional PC monitors to display up to 16
simultaneous live camera feeds per PC monitor. Users are able to access and control all cameras from DVR
sites, whether they are analog, network, or PTZ cameras, all without the need for a KBD300 keyboard.
9.1 Virtual Switch Keypad
The virtual switch keypad allows users to add and remove cameras from a digital virtual switch, change the
virtual switch layout, and control PTZ cameras in the virtual switch. Note:
The digital virtual switch feature
must be setup in the VIGIL Client settings before the keypad is available for use.
Monitor /
Camera /
Input
The currently selected monitor, camera, and input
number will display here as the user configures the
virtual switch.
MON
Each camera spot on the virtual switch is a monitor.
There are 16 virtual switch monitors per PC monitor. To
select a virtual switch monitor, enter the monitor
number and then press the MON button.
Prev / Next
Switches the currently selected camera to the
previous/next camera on the virtual switch map.
Preset
To go to a camera preset, first select the monitor, and
then press the preset number followed by the Preset
button.
Relay
Press this button to trigger an output relay from a DIO
device such as an Adam6060. The VIGIL Client system
must be setup specifically to use this feature. Please
contact your vendor for more information.
CAM
To add a camera to the virtual switch, select the virtual
switch monitor number and then press the virtual
switch input number followed by the CAM button.