ADLINK ACL-8111 - Manual (Page 22)

16 • Installation
2.7 Daughter Board Connection
The ACL-8111 can be connected with five different daughter boards ACLD-
9137, 9182, 9185, and 9188. The functionality and connections are specified
as following:
2.7.1 Connect with ACLD-9137
The ACLD-9137 is a direct connector for the card, which is equipped with 37-
pin D-sub connector. This board provides a simple way for connection. It is
very suitable for the simple applications that do not need complex signal
condition before the A/D conversion is performed.
2.7.2 Connect with ACLD-9182
The ACLD-9182 is a 16 channel isolated digital input board. This board is
connected with CN2 of ACL-8111 via 20-pin flat cable. The advantage of this
board is a 500Vdc isolation voltage is provided, and it can protect your PC
system from damage when an abnormal input signal is occurred.
2.7.3 Connect with ACLD-9185
The ACLD-9185 is a 16 channel SPDT relay output board. This board is
connected with CN3 of ACL-8111 via 20-pin flat cable. By using this board,
you can control outside device through the digital output signals.
ACLD-9185
ACL-8111 ACLD-9182
CN2
CN3