ADLINK ACL-8111 - Manual (Page 40)

34 • C/C++ Library for DOS
5.1 DOS Software Library Installation
5.1.1 Installation
To install the DOS library software and utilities, please follow the following
installation procedures:
1. Put ADLINK CD into the appropriate CD-ROM drive.
2. Type the following commands to change to the card’s directory (X
indicates the CD-ROM drive):
X:\>CD \NuDAQISA\8111
3. Execute the setup batch program to install the software:
X:\NuDAQISA\8111>SETUP
5.1.2 Running Utility
After finishing the installation, you can execute the utility by typing as follows:
C>cd ADLINK\8111\DOS\UTIL
C>8111UTIL
5.1.3 Example Programs
Six example programs in C language are supported in the directory
<SAMPLES>, you can refer these samples and modify them for your own
application. They can help you understand the library more quickly.