ADLINK PXIS-2719A - Manual (Page 41)

System Management 31
PXIS-2719A
3.2 Connect Control
The Connect Control section connects and disconnects the link
between the PXIS-2719A and the remote computer, displays
chassis status log data, and saves and loads threshold settings.
3.2.1 Com Port Setting
To establish a connection between the remote computer and
the PXIS-2719A:
1. Ensure functional connection between the remote moni-
toring port of the PXIS-2719A and the remote computer
2. Launch PXISRemoteMonUtil.exe on the remote com-
puter.
3. Select “COM Port” on the remote computer connected to
the PXIS-2719A
4. Select “Connect” to initiate connection
5. Select “Run” to commence monitoring system status
6. Select “Stop” to cease monitoring
7. Selecting Start initializes monitoring, and selecting Stop
ends the operation.