3 remote status and control, 1 remote on/off, Remote status and control – ADLINK PXIS-2719A User Manual

Page 43: Remote on/off, Figure 3-3, Remote status and control interface

Advertising
background image

System Management

33

PXIS-2719A

3.3

Remote Status and Control

Sets operations and threshold settings for PXIS-2719A, including
remote chassis on/off, target temperature, fan mode, and thresh-
old settings for DC voltage, temperature, and cooling fan speed.

Figure 3-3: Remote Status and Control Interface

3.3.1

Remote On/Off

On/off status of the PXIS-2719A is displayed. Choosing “Power
ON” or “Power OFF” and selecting “Set” directly powers the
chassis on or off.

Target Temperature

Fans run at different speeds based on the monitored tempera-
ture, when the Fan switch on the rear panel is set to AUTO.
Target Temp indicates the temperature when the fans are at
100%. Using the default 50°C as an example, fans run at 40%
when all temperature readings are less than 25°C, and begin

Advertising