ADLINK PXIe-9852 - Manual (Page 22)

12 Getting Started
Inspect the carton and packaging for damage. Shipping and han-
dling could cause damage to the equipment inside. Make sure that
the equipment and its associated components have no damage
before installation.
X
Package Contents
X
PXIe-9852 high-speed digitizer
X
ADLINK All-in-one compact disc
X
PXIe-9852 Quick Start Guide
If any of these items are missing or damaged, contact the dealer
2.2 Installing the Module
1. Turn off the PXIe system/chassis and connect the power
cable from the power source.
2. Align the module’s edge with the module guide in the
PXIe chassis.
3. Slide the module into the chassis until resistance is felt
from the PXIe connector.
4. Push the ejector latch upwards and fully insert the mod-
ule into the chassis.
CAUTION:
The equipment must be protected from static discharge and
physical shock. Never remove any of the socketed parts
except at a static-free workstation. Use the anti-static bag
shipped with the product to handle the equipment and wear a
grounded wrist strap when servicing.
Do not install or apply power to equipment that is damaged or
missing components. Retain the shipping carton and packing
materials for inspection. Please contact your ADLINK dealer/
vendor immediately for assistance and obtain authorization
before returning any product.
NOTE: NOTE:
Connection of the power cable provides grounding to prevent
hazardous ESD (electrostatic discharge).