ADLINK PXIe-9529 - Manual (Page 11)

Introduction 1
PXIe-9529
1 Introduction
The PXIe-9529 is a high-performance 8-CH 24-Bit 192 kS/s
dynamic signal acquisition module, specifically designed for appli-
cations such as structural health monitoring, noise, vibration, and
harshness (NVH) measurement, and phased array data acquisi-
tion.
The PXIe-9529 features 24-bit simultaneous sampling at 192 kS/s
over 8 channels, and a 110 dB dynamic range, providing ample
power for high-density, high channel count signal measurement,
and vibration-optimized lower AC cutoff frequency of 0.3 Hz. All
input channels incorporate 4 mA bias current for integrated elec-
tronic piezoelectric (IEPE) signal conditioning for accelerometers
and microphones.
The PXIe-9529 is auto-calibrated with an onboard reference circuit
calibrating offset and acquiring analog input errors. Following
auto-calibration, the calibration constant is stored in EEPROM,
such that these values can be loaded and used as needed by the
board. There is no requirement to calibrate the module manually.
1.1 Features
X
PXI Express specification Rev. 1.0 compliant
X
Up to 200 MS/s sampling rate
X
8 simultaneous analog inputs
X
192 kS/s maximum sampling rate
X
AC or DC input coupling, software selectable
X
Support for:
Z
One external digital trigger input
Z
IEPE output on each analog input, software configurable
Z
Auto-calibration