2 getting started, 1 installing memory, Installing memory – ADLINK EOS-1200 User Manual
Page 39: 2getting started
Advertising
Getting Started
27
EOS-1200
2
Getting Started
This chapter describes accessing/changing memory modules,
hard disk drives, and the USB dongle in the system. Wall-
mounting is also described.
2.1
Installing Memory
1. Remove the two screws securing the bottom cover and
remove, as shown.
2. Insert the memory module into the DDR3 SO-DIMM
socket at a 45° angle and press down until the module is
properly seated.
Advertising