ADLINK EOS-1200 - Manual (Page 40)

28 Getting Started
2.2 Installing a Hard Disk Drive (HDD)
1. Remove the two screws securing the bottom cover and
remove, as shown.
2. Remove the two screws fixing the hard drive carriage.
3. Slide the hard drive carriage out.
4. Remove the four screws from the hard drive to be
removed.
5. Secure the new hard drive to the hard drive carriage.
6. Slide the hard drive carriage in, until received securely in
the SATA power and data connectors.
7. Secure the hard drive carriage.
8. Replace the bottom cover.