3 installing the usb dongle, Installing the usb dongle – ADLINK EOS-1200 User Manual
Page 41
Advertising
Getting Started
29
EOS-1200
2.3
Installing the USB Dongle
1. Remove the top cover by loosening the thumbscrew by
hand or a screwdriver.
2. Once the USB dongle mounting bracket base D is fixed
to the board surface via standoffs A, unscrew the thumb-
screw B and loosen the USB dongle retainer C.
3. Slide the USB dongle retainer C upward to accommo-
date the USB dongle.
4. Plug the USB dongle into the USB port.
5. Slide the USB dongle retainer C down to secure USB
dongle D to USB dongle mounting bracket base A and
fasten thumbscrew B.
A
B
C
D
Advertising