ADLINK cPCI-6510 User Manual
Page 23
Specifications
9
cPCI-6510
Notes:
1. 7.4 "Programming NT Mode EEPROM Map" on page 59 for
instructions on how to set the PCIe-to-PCI bridge on the
cPCI-6510 to Non-Transparent mode to allow operation in a
peripheral slot.
2. ADLINK-certified thermal design. The thermal performance is
dependent on the chassis cooling design. Sufficient forced air-
flow is required (see 2.4 "Thermal Requirements" on page 13).
Temperature limit of optional mass storage devices may affect
the thermal specification.
3. The hard drive limits the operational vibration tolerance. When
application requires higher specification for anti-vibration, it is
recommended to use a solid state drive (SSD) or Compact-
Flash card.
NOTE:
NOTE:
Specifications are subject to change without prior notice.