ADLINK cPCI-6510 - Manual (Page 60)

46 Getting Started
5.3 PMC/XMC Module Installation
The cPCI-6510 provides one PMC and one PMC/XMC slot and
the cPCI-6510V provides one PMC/XMC slot. The PMC/XMC
slots support 3.3V V(I/O) and 5V VPWR only. For optional
5V V(I/O) and 12V VPWR support, please contact ADLINK.
Installing a PMC/XMC Module
1. Remove the PMC filler faceplate from the front panel.
2. Align the male connectors of the PMC/XMC card (com-
ponent-side down) to the female connectors of the
cPCI-6510 and press down.
3. Secure the PMC/XMC card to the cPCI-6510 by attach-
ing four screws (provided with the card) from the bottom
side of the board.