4 programming nt mode eeprom map, Programming nt mode eeprom map – ADLINK cPCI-6510 User Manual

Page 73

Advertising
background image

Utilities

59

cPCI-6510

7.4

Programming NT Mode EEPROM Map

The cPCI-6510 supports operation in peripheral slot as PCI device

with PCI bus communication with the system board (Universal

Mode). To operate in a peripheral slot in Non-Transparent mode,

the PCIe-to-PCI bridge on the cPCI-6510 should be set to

Non-Transparent mode by programming the NT mode EEPROM

map. The EEPROM map can be downloaded from the cPCI-6510

product page on the ADLINK website:

http://www.adlinktech.com/PD/web/PD_detail.php?cKind=&pid=943
To set the PCIe-to-PCI bridge on the cPCI-6510 to NT mode, per-

form the following steps:

1. Download the EERPOM map cPCI-6510_NT.rar from

the cPCI-6510 product website under Utilities.

2. Prepare a bootable USB flash drive and extract the con-

tents of the folder cPCI-6510_NT into the root directory.

3. Insert the USB flash drive into the cPCI-6510 in system

slot and power up the system.

4. Execute the file NT.bat to program the bridge to

Non-Transparent mode. The board will then operate in a

peripheral slot as a PCI device.

5. To return the cPCI-6510 to Transparent mode, execute

the file TR.bat.

Advertising