9 ipmi user guide, 1 introduction, 2 summary of commands supported by bmr-avr-cpci – ADLINK cPCI-6510 User Manual
Page 97: Chapter 9, ipmi user guide, Prov, Introduction, Summary of commands supported by bmr-avr-cpci, 9ipmi user guide
IPMI User Guide
83
cPCI-6510
9
IPMI User Guide
9.1
Introduction
This chapter is written for those who already have a basic under-
standing of the newest implementation of the baseboard manage-
ment controller (BMC) of the Intelligent Platform Management
Interface (IPMI) specification rev. 2.0. It also describes the OEM
extension IPMI command usages which are not listed in the IPMI
specification.
9.2
Summary of Commands Supported by
BMR-AVR-cPCI
Command
IPMI
Spec
NetFn CMD
Description
IPM Device “Global” Commands
Get Device ID
20.1
App
01h
This command is used to retrieve the
Intelligent Device’s Hardware Revision,
Firmware/Software Revision, and Sensor
and Event Interface Command
specification revision information.
Cold Reset
20.2
App
02h This command directs the Responder to
perform a ‘Cold Reset’ of itself.
Warm Reset
20.3
App
03h This command directs the Responder to
perform a ‘Warm Reset’ of itself.
Get Self Test
Results
20.4 App
04h
This command directs the device to
return its Self Test results, if any.
Get Device GUID
20.8
App
08h
This command returns a GUID (Globally
Unique ID), also referred to as a UUID
(Universally Unique IDentifier), for the
management controller.