ADLINK Starter Kit - nanoX - Manual (Page 16)

2.2 Type 1 Module Installation
If you intend to use a DVI monitor with the ADD2 DVI card, first install the SDVO flat cable
onto the nanoX-ML module. Otherwise, skip ahead to Step 3.
Install SDVO flat cable onto nanoX-ML (if required) Required items
Step 1
Lift the locking mechanism on the nanoX-ML SDVO signal
connector and insert the SDVO flat cable.
Step 2
Press down on the lock on the SDVO connector to secure
the flat cable.
Page 16 NanoX Starter Kit – Quick Start Guide