7 powering up the nanox-base system – ADLINK Starter Kit - nanoX User Manual
Page 32
Advertising
![background image](/manuals/733589/32/background.png)
2.7 Powering Up the nanoX-BASE System
To power up the nanoX-BASE system, follow the steps below.
Powering Up the nanoX-BASE System
Required items
Press the Power Button SW1.
The POST LEDs on the nanoX-BASE will display the
bootup status – "d5" indicates a successful boot
The monitor will display the BIOS boot screen
Page 32
NanoX Starter Kit – Quick Start Guide
Advertising