ADLINK Starter Kit - nanoX User Manual
Page 18
Advertising
![background image](/manuals/733589/18/background.png)
Install heatsink onto nanoX-ML module (cont'd)
Required items
Step 5
Use one M2.5, L:6mm screw provided to fasten the
heatsink to the nanoX-ML module
Install nanoX-ML module onto carrier board
Required items
Step 6
Place the nanoX-ML module with heatsink onto the AB
connector on the carrier board as shown
(continued below)
Page 18
NanoX Starter Kit – Quick Start Guide
Advertising