Connecting lvds input to fptb – ADLINK Starter Kit - nanoX User Manual
Page 40
Advertising
Connecting LVDS Input to FPTB
Use the FPTB LVDS-to-LVDS cable (P/N 30-20449-0000) to connect the LVDS output
connector on the nanoX-BASE (CN6) to the LVDS input connector on the FPTB (CN4).
Connecting LVDS Input to FPTB
Required items
Plug the LVDS-to-LVDS cable into nanoX-BASE CN6
Plug the LVDS-to-LVDS cable connector into FPTB CN4
LVDS-to-LVDS cable
Page 40
NanoX Starter Kit – Quick Start Guide
Advertising