6 power and i/o connections – ADLINK Starter Kit - nanoX User Manual
Page 30
Advertising
2.6 Power and I/O Connections
Connect the Power Supply
Required items
Plug the ATX connector of the power supply into CN1 of
the nanoX-BASE
Plug the ATX 12V 4-pin connector of the power supply into
the nanoX-BASE
DO NOT plug the ATX 12V 4-pin connector of
the power supply into the ATX 24-pin power
connector on the nanoX-BASE
Page 30
NanoX Starter Kit – Quick Start Guide
Advertising