ADLINK Starter Kit - nanoX User Manual
Page 20
Advertising
![background image](/manuals/733589/20/background.png)
If you are not using a DVI monitor with the ADD2 DVI card, skip ahead to
Section 2.4, DVI
Display Interface Installation.
Install SDVO flat cable onto carrier board (if necessary) Required items
Step 8
Lift the locking mechanism on the nanoX-BASE SDVO
input connector (CN30) and insert the SDVO flat cable.
Insert the SDVO flat cable into nanoX-BASE SDVO input
connector and press down on the locking mechanism
Page 20
NanoX Starter Kit – Quick Start Guide
Advertising