ADLINK CM3-GF - Manual (Page 34)

TME-104P-CMx-GF-1V7 Rev 1.7 26 (81)
Display Voltage Jumpers (X22)
Jumper LVDS and Backlight Power Supply
Connector type: IDC 6-pin header, 2.00 mm
Use a 2 mm jumper between 1-3 or 3-5 to select the backlight voltage.
Use a 2 mm jumper between 2-4 or 4-6 to select the display voltage.
Pin Signal (Backlight) Pin Signal (LVDS)
1 +12V 2 +3.3V
3 Backlight Voltage 4 Display Voltage
5 +5V 6 +5V
3.4 Ethernet Controller
The Intel i210 Ethernet controller supports 10/100/1000-Mbit speeds.
Features
 IEEE 802.3 compliant
 Auto Negotiation
 Audio-video bridging
 • IEEE 1588/802.1AS precision time synchronization
 • IEEE 802.3Qav traffic shaper (with software extensions)
 Jumbo Frame Support
 Interrupt moderation, VLAN support, IP checksum offload
 Four transmit and four receive queues
 Advanced cable diagnostics, auto MDI-X
 ECC – error correcting memory in packet buffers
 IEEE 802.3az Energy Efficient Ethernet (EEE)
default jumper setting