ADLINK CM3-GF - Manual (Page 50)

TME-104P-CMx-GF-1V7 Rev 1.7 42 (81)
Exception Codes
In case of an error, the SMC shows a blink code on the STATUS-LED. This error code is also reported by the
SMC Flags register. The Exception Code is not stored in the Flash Storage and is cleared when the power is
removed. Therefore, the “Clear Exception Code”-Command is not supported.
Exception
Code
Error Message
0 NOERROR
2 NO_SUSCLK
3 NO_SLP_S5
4 NO_SLP_S3
5 NO_PWRGD_ATX
6 NO_PWRGD_1V1A
7 NO_PWRGD_VCORE
8 NO_PWRGD_DDR3
9 NO_PWRGD_1V0S
10 NO_PWRGD_1V1S
11 NO_PWRGD_1V8S
13 +V3.3PCI
14 +V3.3IN
15 +V5S
16 +V5SBY
18 BIOS_FAIL
19 STACKING_ERROR
20 LOW_VIN