Notice page, Audience – ADLINK CoreModule 430 User Manual

Page 2

Advertising
background image

Notice Page

DISCLAIMER

ADLINK Technology, Incorporated makes no representations or warranties with respect to the contents of

this manual or of the associated ADLINK products, and specifically disclaims any implied warranties of
merchantability or fitness for any particular purpose. ADLINK shall under no circumstances be liable for

incidental or consequential damages or related expenses resulting from the use of this product, even if it has

been notified of the possibility of such damages. ADLINK reserves the right to revise this publication from
time to time without obligation to notify any person of such revisions. If errors are found, please contact

ADLINK at the address listed below on the Notice page of this document.

Audience

This manual provides reference only for computer design engineers, including but not limited to hardware

and software designers and applications engineers. ADLNK Technology, Inc. assumes you are qualified to

design and implement prototype computer equipment.

ii

Reference Manual

CoreModule 430

TRADEMARKS

CoreModule and the Ampro logo are registered trademarks, and ADLINK, Little Board, LittleBoard,
MightyBoard, MightySystem, MilSystem, MiniModule, ReadyBoard, ReadyPanel, ReadySystem, and
RuffSystem are trademarks of ADLINK Technology, Inc. All other marks are the property of their
respective companies.

REVISION HISTORY

ADLINK Technology, Incorporated
5215 Hellyer Avenue, #110
San Jose, CA 95138-1007
Tel. 408 360-0200
Fax 408 360-0222

http://www.adlinktech.com

© Copyright 2008, 2009, 2010, 2011, 2012 ADLINK Technology, Incorporated

Revision

Reason for Change

Date

A, A

Initial Release

Oct/08

1.0

Added U9 chip to table 2-1; revised description of U7 chip in table 2-1;
revised JP7 default to pins 2-3 in table 2-3; changed document p/n from

5001840 to 50-1Z006-1000; changed rev to 1.0

Oct/09

1010

Changed pitch of J4 header in

Tables 2-2

and

3-5

to 0.079

";

changed

rev of this document from 1.0 to 1010; changed pin 9 in

Table 3-10

from 3.6/4.0V to 3.0V max; added BIOS Setup Screens section to ch 4;

replaced EOL, U14 video memory in

Table 2-1

with new component;

changed definition of SPI Flash device

June/12

Advertising