Bios boot setup screen, Figure 4-4 – ADLINK CoreModule 430 User Manual
Page 46
Chapter 4
BIOS Setup
40
Reference Manual
CoreModule 430
BIOS Boot Setup Screen
Figure 4-4. BIOS Boot Setup Screen
Boot Settings Configuration
•
Quick Boot – [Disabled; Enabled]
•
Quiet Boot – [Disabled; Enabled]
•
Add On ROM Display Mode – [Force BIOS; Keep Current]
•
Bootup Num-Lock – [Off; On]
•
PS/2 Mouse Support – [Disabled; Enabled; Auto]
•
Wait for 'F1' If Error – [Disabled; Enabled]
•
Hit 'DEL' Message Display – [Disabled; Enabled]
•
Interrupt 19 Capture – [Disabled; Enabled]
•
Boot From LAN – [Disabled; Used INT 18h; Used INT 19h; PnP/BEV (BBS); RPL]
•
Beep Function – [Disabled; Enabled]
•
OnBoard Virtual Flash FDD – [Disabled; Enabled; Diskette Write Protect]
BIOS Setup Utility
Boot Settings
Select Screen
Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
v02.xx (C) Copyright 1985-20xx, American Megatrends, Inc.
Boot Settings Configuration
Boot Device Priority
Main Advanced PCIPnP Boot Security Chipset Exit
CM430_BIOS_BootScreen_a