Bonaire Navigator Controller - Manual (Page 26)

Multi-Appliance Navigator Control
Navigator Control Page 26
Dual Cycle Refrigerated Air Conditioning
22. USING YOUR NAVIGATOR CONTROLLER
Using your Navigator Controller for manual operation of your Refrigerated Air Conditioner is the same as
your gas central heater where you want direct control, without programming. When you press HEAT/COOL
button, your Navigator Controller will display 3 options Cool, Heat or Heal & Cool for your Dual Cycle
Refrigerated Air Conditioner
COOLING
In the cool option you can operate 3 types of MODE operation, Program,
Thermo and Fan. For cooling -
1. Turn the Navigator Controller ON by pressing the ON/OFF
button.
2. Press the HEAT/COOL button until the Cool icon appears on the
left side of the display and press the ENTER button to select.
3. Press the MODE button to change the mode of operation. Press
the ENTER button to select the mode.
4. Press the or button to decrease or increase the
temperature and press the ENTER button to set the temperature.
You can set the temperature from 10°C to 32°C.
5. Press the ZONE button to operate the different available zones.
HEATING
•
The heat option is the same as the Ducted Gas Heating. In this state
the system will operate in 5 types of MODE operation, Program,
Thermo, Boost, Economy and Fan.
•
Please refer to the MANUAL OPERATION of the Ducted Gas Central
Heating.
HEAT & COOL
In Heat & Cool state the system can operate 3 MODE types - Program,
Thermo and Fan. To turn the Heat & Cool state on -
1. Turn the Navigator Controller ON by pressing the ON/OFF button.
2. Press the HEAT/COOL button until both Heat & Cool icons appear
on the display and press the ENTER button to select.
3. Press the MODE button to view the different modes of operation
and press the ENTER button to select.
4. Press the or button to decrease or increase Set Temp.
You can set the temperature from 10°C to 32°C.