Bonaire Navigator Controller - Manual (Page 8)

Multi-Appliance Navigator Control
Navigator Control Page 8
Navigating the Controls
5. USING THE 8 BUTTONS
The following explains the function of each of the button:
ON/OFF
•
Turns your heating and / or cooling appliances ON and OFF.
BUTTONS
•
Press & hold UP/DOWN button to increase or decrease settings.
•
Or press & release UP/DOWN buttons to increase or decrease one
point at a time. Settings include day, time, temperature, fan speed.
• The UP/DOWN buttons are also used to select the different zones
or programs available.
HEAT/COOL
•
Press to select from the heating and or cooling choices (In most
cases you will only be able to see the titles for the appliances that
you have installed. If there is only one appliance installed, pressing
the heat/cool button will result in “Error” being displayed).
•
Heat: Ducted Gas Central Heaters
•
Cool: Evaporative or Dual Cycle Refrigerative Air Conditioning
•
Heal/Cool: Ducted Gas Central Heater and Dual cycle
Refrigerated Air Conditioning
MODE
•
The MODE button allows the user to select the operating mode for
the currently selected appliance type.
•
There are six modes of operation defined. Thermo and Fan are
common to all appliances. Program, Manual, Boost and Economy
are only available on certain appliance types.
ZONE
The ZONE button allows the user to select the area or section
of your house for heating and cooling control (If zones are
available).