Bonaire Reverse Cycle - Manual (Page 16)

Multi-Appliance Comfort Control
Page 16
Ducted Reverse Cycle
QUICK START
First - the 15 second delay
To give you time to choose your settings
the Comfort Control pauses 15 seconds
then sends its signal to your
Heater/Cooler. So don't worry if
something doesn't happen immediately.
Watch for the transmit symbol at
the top of the screen. This means that
the signal has been sent.
If you don't want to wait, pressing and
releasing the ENTER button sends your
settings immediately. (You don't need to
do this when using ON/OFF.)
Control Functions
1
ON/OFF
Turns the unit On or Off
2
Arrows
Make adjustments to temperature settings
3
Operating Mode
Operation mode Selection for HEAT, COOL or
HEAT COOL
4 MANUAL / AUTO
Manually selecting the product function and
settings or using the program mode.
5 ECONOMY/BOOST
Press this button to cycle through Economy,
Boost and back to normal operation
6 ZONE ABCD
Press this button to turn zone motors (where
fitted) on and off. Refer to Page 21 for more
details.
7 SET TIME/PROGRAM
Press the button for 2 seconds before releasing
to set the time. See Page 9 for more details.
Press and release the button with a touch to set
up timed program. See page 22 for details on
setting a program sequence.
8 ENTER
Press the enter button to save settings or
override the 15 second delay.
Control Display
9
Time and day information
Displays the current time and day.
10 Set and room temperatures
Displays the room temperature and the
set temperature for the system to
achieve.
11 Battery Low status symbol
(RF controls only)
12 Transmission Symbol
Indicates the unit and control are
communicating. See page 32 for more
information.
13 Operating Mode - Manual or
Auto
Indicates is the unit is in standard
thermostat mode (MANUAL) or if the
program is controlling the unit to
programmed settings.
14 Unit Setting
Indicates if the control is in HEAT or
COOL mode or if it is using HEAT &
COOL
15 Program mode status.
I
ndicates the program period being, 2,
3 or 4.