Bonaire Reverse Cycle - Manual (Page 21)

Multi-Appliance Comfort Control
Page 21
Ducted Reverse Cycle
ZONES - S ELECTING ABCD OPTIONS
Selecting ZONE ABCD only applies if your home is fitted with optional
motorised ductwork dampers (please consult your dealer) that allow
opening or closing of each section of ducting or zoned area.
For correct operation the controller must have at least one zone open at
all times. The default zone is A if no other is selected. Where zone
motors are fitted the installer can set your controller to show only the
zones available for use.
The Controller will not allow you to turn all of the zones off. If you press
and release ENTER with all zones set to off the Controller will recall
your last correct zone setting.
To set the open or closed status of a ZONE:
1. Press and release the CLEAN FILTER/ZONE ABCD button.
ZONE A (or the current open zone) will flash.
2. Press ▼ or ▲ to select the zone you wish to control.
3. Press the ON/OFF button to set a zone as open (ON) or closed
(OFF). Repeat to open or close more zones. If the letter is
already displayed on the LCD screen the zone is open / on.
4. Press and release ENTER to save your selections. Now the air
conditioner operates only in your selected zone/s.