Bonaire Reverse Cycle - Manual (Page 8)

Multi-Appliance Comfort Control
Page 8
Navigating the Controls
MANUAL/AUTO
• Press to select Manual or Auto (programmed)
operation.
ECONOMY/BOOST
• Select Economy, Boost or Normal operating
modes.
CLEAN FILTER/ZONE ABCD
• Press to select the different zones within the
house (if fitted, please refer to the zone
operation section of this manual). NOTE: The
CLEAN FILTER function is not used for
Bonaire Ducted Reverse Cycle.
SET TIME/PROGRAM
• Press & release to select the programming
options.
• To SET TIME, press and hold the button until
TIME is displayed (please refer to the ‘Setting
Day and Time section of this manual)
ENTER
• Press and release to save settings when in
SET TIME, PROGRAM mode and ZONE
selection setting.
• Press and release to immediately send
instructions.
PRECOOL
• Not used for Bonaire Ducted Reverse Cycle
systems.
RESET
• Press & release SET TIME/PROGRAM and
ENTER simultaneously to reset the unit if
RESET is displayed.