EXFO CableSHARK P3 VF/DSL Cable Qualifier - Manual (Page 235)

CableSHARK P3 User Guide
223
SEND TONE
600 OHMS
0
TRACING TONE
EDIT /
SELECT MAIN
MENU
Test Type :
Term Impedance:
Level (dBm):
Frequency Mode:
E F CHG
SEND TONE
F IGURE 15.1.4A - S ETTING U P THE T RACING T ONE
The VF TEST menu has the following configuration option.
TEST TYPE: Select SEND TONE
TERM IMP: 600 ohms (or 100, 150 ohms if your unit does not have 600 ohms installed).
Level (dBm): Level can be set from –16 dBm to +18 dBm. Use the asterisk key ( * ) to toggle
between minus ( - ) and plus ( + ) symbols.
Frequency Mode: Allows user to select from SPOT, VARIABLE, TX 3 TONE SLOPE and TRACING
TONE.
With TRACING TONE selected, press the RUN/STOP key to start the test. The following screen is
displayed.