EXFO CableSHARK P3 VF/DSL Cable Qualifier - Manual (Page 311)

CableSHARK P3 User Guide
299
The user can also click the Direct Connection icon on the toolbar to invoke the “Setup Connection
Through…” menu shown above.
J.6.4 View Menu
The View Menu contains two selections that control whether or not the Toolbar at the top of the screen is
displayed and whether the Status Bar at the bottom of the screen is displayed. In some cases, it may be
advantageous not to display the Status Bar and / or Toolbar so that more space in the main window is
available to view results. To activate the View menu, simply click the “View” item on the Menu Bar.
The Toolbar and/or the Status Bar can now be activated/deactivated.
J.6.4.1 View Toolbar
Click the “Tool bar” item on the View menu to toggle the display of the Toolbar at the top of the screen on or
off. A check mark next to this item indicates that the Toolbar is enabled.
13.6.4.2 View Status Bar
Click the “Status bar” item on the View menu to toggle the display of the Status Bar at the bottom of the
screen on or off. A check mark next to this item indicates that the Status Bar is enabled.
J.6.5 Window Menu
The Window Menu contains menu items such as Cascade and Tile, which enable the user to more easily
organize test and/or result windows on the screen.
To activate the Window menu, click the Window item on the Menu Bar. A drop down menu will appear with
entries such as Cascade, and Tile. Just click on the desired entry on the menu to perform that function.