EXFO FTB-8100 Series Transport Blazer for FTB-500 - Manual (Page 482)

Next-Generation Tabs
468 FTB-8100 Series Transport Blazer
LCAS - Source
LCAS - Source
Note: The test must be started and Enable LCAS has to be enabled from either
VCAT TX - Overview on page 459 or VCAT RX - Overview on page 463 in
order to access the LCAS Source functionality. Alternatively, LCAS
functionality can be enabled via the test setup, as the test case is being
mounted.
Press TEST and LCAS.
The LCAS Source tab gives access to the following tabs:
³
LCAS Source - LCAS Overview on page 469
³
LCAS Source - Alarm on page 471
³
LCAS Source - Error on page 473
³
LCAS Source - SQ/CTRL Control on page 475
³
LCAS Source - MST/RS-Ack Control on page 477
³
LCAS Source - Configuration on page 479
Note: The default selected tab is LCAS Overview.
³
Arrows
Single arrows move one position up or down in the list.
Double arrows move one page up or down in the list.