EXFO FTB-8100 Series Transport Blazer for FTB-500 - Manual (Page 503)

Next-Generation Tabs
SONET/SDH Application 489
LCAS Sink
LCAS Sink - Configuration
Press TEST, LCAS and Configuration (under LCAS Sink).
³
Member indicates the timeslot number.
³
Auto Add at Startup: Allows enabling the members that will be
automatically added (applied) when the test is started.
Remote DUT
Note: Not available in Through mode.
Non-LCAS: Specifies that the remote device connected to the FTB-8100
Series is LCAS (when disabled) or Non-LCAS (when enabled).
Alarm
Note: Not available when Non-LCAS from the Remote DUT group is enabled.
PLCR Threshold (Partial Loss of Capacity Receive Threshold): Allows the
selection of the PLCR threshold value. Choices are from 1 to the
provisioned member minus 1. The default setting is 1.