EXFO PSO-200 Optical Modulation Analyzer - Manual (Page 141)

Optical Modulation Analyzer 133
B SCPI Commands Reference
This appendix presents detailed information on the commands and
queries supplied with your PSO-200 Optical Modulation Analyzer.
Quick Reference Command Tree
I
MPORTANT
You must add the following mnemonic at the beginning of any
command or query that you send to the instrument:
LINStrument<LogicalInstrumentPos>:
where <LogicalInstrumentPos> corresponds to the identification
number of the instrument. In the PSO-200, its value is 1.
Command Parameter(s) P.
MMEMory LOAD TRACe <Filename> 138
STORe TRACe <Filename> 139
DATA <Path> 140
SENSe DDEMod AVERage STATe <Mode> 141
STATe? 142
COUNt <Count> 143
COUNt? 144
TCONtrol EXPonential|LAST 145
TCONtrol? 147
MODulation "APSK|BPSK|CW|DP-APSK|DP-BPS
K|DP-CW|DP-FreeRun|"DP-Intensity
Sampling"|DP-OOK|DP-16QAM|DP-
QPSK|FREERUN|"Intensity
Sampling"|OOK|16QAM|QPSK|"
148
MODulation? 151
SRATe <Rate> 154