EXFO PSO-200 Optical Modulation Analyzer - Manual (Page 198)

SCPI Commands Reference
190 PSO-200
Product-Specific Commands—Description
:SENSe:DDEMod:FILTer:TYPe
Description This command sets the filter Type of the of the
digital demodulator.
At *RST value, it is None .
Syntax :SENSe:DDEMod:FILTer:TYPe<wsp>Chebyshev1
|Bessel|Butterworth|None
Parameter(s) filter:
The program data syntax for the first parameter is
defined as a <CHARACTER PROGRAM DATA>
element. The allowed <CHARACTER PROGRAM
DATA> elements for this parameter are:
Chebyshev1|Bessel|Butterworth|None.
Sets the filter type.
Chebyshev1, sets Chebyshev1 as the filter type.
Bessel, sets Bessel as the filter type.
Butterworth, sets Butterworth as the filter type.
None, sets None as the filter type.
Example(s) LINS1:SENS:DDEM:FILT:TYP Chebyshev1
LINS1:SENS:DDEM:FILT:TYP Bessel
LINS1:SENS:DDEM:FILT:TYP Butterworth
LINS1:SENS:DDEM:FILT:TYP None
See Also SENS:DDEM:SYNC:SWOR:PTYP Prbs
SENS:DDEM:SYNC:SWOR:PTYP?