EXFO PSO-200 Optical Modulation Analyzer - Manual (Page 162)

SCPI Commands Reference
154 PSO-200
Product-Specific Commands—Description
:SENSe:DDEMod:SRATe
Description This command sets the symbol rate (symbols per
second) for the analyzer's digital demodulator.
At *RST, this value is set to 28 Gbaud or 20
Gbaud. It’s device dependent.
Syntax :SENSe:DDEMod:SRATe<wsp><Rate>
Parameter(s) Rate:
The program data syntax for <Rate> is defined
as a <DECIMAL NUMERIC PROGRAM DATA>
element.
Selects the symbol rate to be set for the analyzers
digital demodulator.
Example(s) SENSe:DDEM:SRAT 25.3
SENSe:DDEM:SRAT?
Returns: 25.3
Notes State is saved in instrument.
See Also SENSe:DDEMod:SRATe?