EXFO PSO-200 Optical Modulation Analyzer - Manual (Page 156)

SCPI Commands Reference
148 PSO-200
Product-Specific Commands—Description
:SENSe:DDEMod:MODulation
Description This command sets the digital communication
format used by the demodulator.
At *RST, this value is set to DP-QPSK or QPSK. It’s
device dependent.
Syntax :SENSe:DDEMod:MODulation<wsp>"APSK|BPS
K|CW|DP-APSK|DP-BPSK|DP-CW|DP-FreeRun|
"DP-Intensity
Sampling"|DP-OOK|DP-16QAM|DP-QPSK|FREE
RUN|"Intensity Sampling"|OOK|16QAM|QPSK|"
Parameter(s) Modulation:
The program data syntax for the first parameter is
defined as a <CHARACTER PROGRAM DATA>
element. The allowed <CHARACTER PROGRAM
DATA> elements for this parameter are:
"APSK|BPSK|CW|DP-APSK|DP-BPSK|DP-CW|D
P-FreeRun|"DP-Intensity
Sampling"|DP-OOK|DP-16QAM|DP-QPSK|FREE
RUN|"Intensity Sampling"|OOK|16QAM|QPSK|".
Selects the modulation for digital
communication format used by demodulator.
APSK, selects Amplitude and Phase-shift keying
as the modulation for the digital communication
format.