EXFO PSO-200 Optical Modulation Analyzer - Manual (Page 204)

SCPI Commands Reference
196 PSO-200
Product-Specific Commands—Description
:SENSe:DDEMod:WINDow:UPPerbound
Description This command sets the measurement for
Window Upper bound.
At *RST value, it is set to 60 %.
Syntax :SENSe:DDEMod:WINDow:UPPerbound<wsp>
<percent>
Parameter(s) percent:
The program data syntax for <percent> is
defined as a <DECIMAL NUMERIC PROGRAM
DATA> element.
Sets the measurement for Window Upper bound
in %.
Example(s) LINS1:SENS:DDEM:WIND:UPP 55
See Also SENS:DDEM:WIND:LOW 1
SENS:DDEM:WIND:LOW?