EXFO PSO-200 Optical Modulation Analyzer - Manual (Page 196)

SCPI Commands Reference
188 PSO-200
Product-Specific Commands—Description
:SENSe:DDEMod:MASK:STATe
Description This command enables and disables the Mask
state of the digital demodulator.
At *RST value, it is disabled.
Syntax :SENSe:DDEMod:MASK:STATe<wsp>EVM|Const
ellation|Intensity,<enable>
Parameter(s)

Mask Type:
The program data syntax for the first parameter is
defined as a <CHARACTER PROGRAM DATA>
element. The allowed <CHARACTER PROGRAM
DATA> elements for this parameter are:
EVM|Constellation|Intensity.
Sets the Mask Type.
EVM, set the mask type.
Constellation, set the mask type.
Intensity, set the mask type.

enable:
The program data syntax for <enable> is
defined as a <Boolean Program Data> element.
The <enable> special forms ON and OFF are
accepted on input for increased readability. ON
corresponds to 1 and OFF corresponds to 0.
Enable the Mask Type.
Example(s) LINS1:SENS:DDEM:MASK:STAT EVM,1
See Also SENS:ROSC:SOUR:PHAS ON
SENS:ROSC:SOUR:PHAS?