Generalmusic wk1000 - Manual (Page 11)

owners manual wk1000
Page5 Getting Started
UPPER 2 UPPER 2
UPPER 1 UPPER 1
LOWER LOWER
PIANO
POLYSYNTH
UPPER 2 UPPER 2
UPPER 1
LOWER
UPPER 2
UPPER 1
LOWER LOWER
UPPER 2 UPPER 2
UPPER 1 UPPER 1
LOWER LOWER
GETTING STARTED
In this chapter you will fi nd step by step instructions on the basic functions that will help you understand
and get to know your instrument straightaway.
POWERING UP AND PRELIMINARY OPERATIONS
The switch to turn the keyboard on and off is located on the left lateral panel.
To power wk1000 up insert the power supply cable in the rear-panel mains
socket, and plug the cable into a 220V wall socket.
POWER ON/OFF
PLAY THE KEYBOARD AND CHANGE THE SOUNDS
Play on the keyboard. 1
The group of Keyboard activator keys (Upper 2,
Upper 1, Lower) shows that UPPER 1 is active: the
led is ON. The UPPER 1 section of the keyboard is
now playing.
The PIANO sound plays over the whole keyboard
extension.
You can also enable the Upper 2 e Lower sections
of the keyboard.
Press the button UPPER 2 and play 2
A second sound is enabled layered with the fi rst,
Each note played on the keyboard plays two sounds
simultaneously.
Press the button LOWER and play on the keyboard
using with both hands.
3
A third sound is now enabled. The keyboard is now
divided in two parts, with a Split point on B3 note
The LOWER keyboard section plays in the C2 - B3
area. UPPER 1 and UPPER 2 sections play in the
C4 - C7 area.
Adjust the overall volume. 4
Use the VOLUME dial to adjust the overall volume
of the instrument. Two thirds of the maximum range
of the knob is recommended.
PIANO
PIANO
POLYSYNTH
HALOPAD