Generalmusic wk1000 - Manual (Page 31)

SOUND
PERFORMANCE
STYLE / SONG
ARR. MODE / SPLIT
HARMONY
REVERB / CHORUS
MIDI / GENERAL
LOWER
UTILITY
UPPER 2
UPPER 1
LOAD
SAVE
DISK
MODE MENU
PERFORMANCE STYLE SOUND
ACC. 1 ACC. 2 DRUMS BASS LOWER UPPER 2 ACC. 3 CHORD UPPER 1
dim6
mM7 aug sus 4
513
119
REC REC REC
TRANSPOSE MEASURE TEMPO METRONOME
UPPER 2 PAGE
UPPER 1 PAGE
LOWER CURSOR
0 5
SET OFF
PAGE PAGE
PAGE PAGE
CURSOR
1
4
7
-
2
5
8
0
3
6
9
+
+100
If you wish to change the Sound assigned to one or more tracks, check
fi rst the PERF menu funcion IS NOT selected and the S.T. PLAY function
is OFF, then press the corresponding function key (F1/F9) to enable the
track, that will start blinking in the display.
3
When the track binks in the display the sound can be changed using the
keypad
Using the TEMPO/DATA buttons it’s possible to modify the track volume
level.
Press START / STOP to start the Style 4
This operation may be also performed while a Style is playing. In this case
the new Style selected will start on the successive beat.
The name of the fi rst Performance in the fi rst group and the name of the
current group (es. P11: GranPNO) will appear in the display. Each func-
tion key selects one of the 9 Performances of the selected group.
RECALLING A STYLE FROM A PERFORMANCE
Each Performance contains a Style that can be recalled at any time. Press
and hold down the STORE PERFORMANCE button for a few seconds. When
the (“?”) message appears in the display confi rm with ENTER. The cur-
rent panel confi guration, including the active Variation and Tempo will be
stored to the Performance.Therefore it is possible to recall a Style (and the
relative Variation/Tempo) by selecting a Performance, provided that the
STYLE LOCK function is not active.
Disable STYLE LOCK if it’s ON (the display indicator to must be OFF) 1
Enter the perfomance mode pressing the PERFORMANCE RECALL button 2
P11GRANPNO
Use the PAGE e PAGE or the +/ – buttons in the numeric keypad to
change performance group (7 groups are available) .
3
Use the TEMPO/DATA buttons to control the Tempo speed. Recalling a Per-
formance automatically disables the SINGLE TOUCH PLAY function and
restores wk1000 to the default status of the Performance. If the TEMPO
LOCK function is disabled, the Tempo is also updated.
Press the START/STOP button to play the Style 4
owners manual wk1000
Page25 Styles