Generalmusic wk1000 - Manual (Page 58)

ACC. 1 ACC. 2 DRUMS BASS LOWER UPPER 2 ACC. 3 CHORD UPPER 1
PAGE
PAGE PAGE
CURSOR
PAGE
PAGE PAGE
CURSOR
owners manual wk1000
the digital signal processor Page52
Note: selecting another Performance (or recalling the current one), before saving the
changes, the Performance will be restored to the previously changed settings.
CONTROLLING THE EFFECT SEND LEVEL
The appropriate effect (Reverb or Chorus) effect can be set to each Performance track independently.
REVSEND Controls the REVERB level in each Performance track
CHOSEND Controls the CHORUS level in each Perforrmance track
1 Select the track you wish to modify, using the function buttons
Note: the Performance or Single Touch mode must not be selected
3
Press the PAGE button repeatedly until you get to the REVSEND or CHO-
SEND page
2 Press the PAGE button to enter the track edit page.
The selected track will blink in the display, and the assigned sound name will be
shown in the 8-digit area
The current effect value is shown in the display (range 00-15)
4 Modify the value using the TEMPO/DATA buttons
5 Press ESCAPE to exit
6
Press the STORE PERFORMANCE button for a few seconds and confi rm with
ENTER to save the changes to the current Performance