Generalmusic wk1000 - Manual (Page 54)

1
4
7
-
2
5
8
0
3
6
9
+
+100
ACC. 1 ACC. 2 DRUMS BASS LOWER UPPER 2 ACC. 3 CHORD UPPER 1
PAGE
PAGE
CURSOR CURSOR
ACC. 1 ACC. 2 DRUMS BASS LOWER UPPER 2 ACC. 3 CHORD UPPER 1
owners manual wk1000
the user styles Page48
If you wish to further improve the pattern, stop the execution by pressing the Start/Stop key. Select a new quantize
value and listen to the newly modifi ed RIFF agin. You can continue until the patterns sounds perfect.
USER STYLE PLAYBACK
1 Press the START/STOP button to start the User Style
Note: If the user style you have recorded includes less then 4 Variations, ensure that the
leds corresponding to the Variations are ON. If they are not, no sound will be heard.
2 Play on the keyboard using normally your User Style
MODIFYING A USER STYLE: Overdub, Quantize, Clear Note, Clear RIFF, Clear Tempo, Clear All Style
Various options are available to modify your User Style. You can apply changes as
soon as you have fi nished recording a RIFF or a Style.
1 Once fi nished to record a RIFF, do not exit the RECORD MODE
2
If you are not in Record mode, press the RECORD key to enable the mode,
then use the +/- buttons to select the RIFF you wish to modify. Select the
desired track by pressing the corresponding Function (F1/F5) key. Your
style can now be modifi ed.
The following modifi cation options are possible:
ADDING NEW ELEMENTS (OVERDUB)
1 Set the RIFF in RECORD MODE
3 Stop the recording and repeat the procedure in each track you wish to modify
2 Play the notes you wish to add to the pattern. These will be added (overdub) the existing ones
QUANTIZE
The QUANTIZE function self-corrects timing recording errors. In other words, small possible imper-
fections are trimmed and corrected, and the beats are made homogeneous within a bar, according
to the fi xed Quantize value
1
Select and play the RIFF you wish to correct, then press the QUANTIZE
button. The playback stops and the RIFF, track and current quantize value
are shown in the display.
2
Use the CURSOR button to move to the QUANTIZE parameter, and the
TEMPO/DATA buttons to select a new value
3 Press the START/STOP button to listen to the corrected RIFF
Press the ENTER button twice to confi rm your edit 4
Apply this procedure to any RIFF you wish to modify.
CLEAR NOTE
If you detect some wrong notes in a RIFF, you can clear them. Up to 5 notes can be cleared at the same time.
1 Select the RIFF you wish to correct, then press the CLEAR btton
2 Select the track you wish to modify by pressing the relative Function button
In our example some note will de deleted from the DRUM track.
3
While the RIFF is playing, check on the beat counter the point where are
positioned the notes you wish to clear
4
Press the keyboard note you wish to cancel just a little below the estab-
lished point.
5 Stop the pattern by pressing the START/STOP button
6 Press the ESCAPE button twice to exit the CLEAR mode