Dukane iQ Series ULTRASONIC POWER SUPPLY AL ISO 9001:2008 - Manual (Page 19)

Page 3
Section 3 – Installation
Dukane Manual Part No. 403-583-00
Before Installation
As you plan for the installation of your generator,
please consider these important subjects as listed
below:
• When to use lockout / tagout devices
• Lifting the generator safely - See Section 2,
Health and Safety, Page 9
When to Use Lockout /
Tagout Devices
The typical kind of LOTO device for this generator
is a clam shell type device (with lockout capability).
The LOTO device is placed over the plug end of the
generator electrical cord. This effectively prevents
access to the energy isolation point. See the example
of one such device in the figure above.
The figure to the right shows the lockout device in the
closed, locked position.
Continued
Figure 3-1 Lockout Device In Open Position,
Unlocked
Figure 3-2 Bottom Lockout Device In
Closed Position, Locked
WARNING
Electrical safety hazards
exist inside the generator
chassis . Before making
any internal adjustments
to the generator, apply a
lockout/tagout (LOTO)
device to the generator
chassis .
