Dukane iQ Series ULTRASONIC POWER SUPPLY AL ISO 9001:2008 - Manual (Page 40)

Page 34
iQ Series, Ultrasonic Hand Held Systems User’s Manual
Dukane Manual Part No. 403-583-00
Continued
Ramp Up Time
This parameter increases the amplitude linearly in
the programmed time period at the start of the weld
from zero to the programmed amplitude level. This
brings the probe up to operating amplitude smoothly
preventing shock stress.
Follow the on screen prompts to make setting
adjustments.
Lock and Hold
For an explanation of Frequency Lock and Hold,
please refer to Application Note 505 found on our
website at:
http://www.dukane.com/us/DL_ApplData.asp
Follow the on screen prompts to make setting
adjustments.
Trigger by Power
For an explanation of Trigger by Power and the
three settings that are connected with it, please refer
to Application Note 506 found on our website at:
http://www.dukane.com/us/DL_ApplData.asp
When Trigger by Power is selected, three additional
settings screens are presented:
•
Trigger Amplitude;
•
Trigger Power; and,
•
Trigger Timeout
See Figures 5-14, 5-15, and 5-16 for previews of
these screens
Figure 5-14 Trigger Amplitude
Figure 5-15 Trigger Watts
Figure 5-16 Trigger Timeout
Trigger By Power
Amplitude
40 %
_
Trigger By Power
Watts
80 W
_
Trigger By Power
Timeout
1.100 S
_