GoDEX EZPL - Manual (Page 18)

13
^XSET,CODEPAGE,n - Select Code Page
Syntax ^XSET,CODEPAGE,n
Parameter n=0, CODEPAGE 850 n=1, CODEPAGE 852 n=2, CODEPAGE 437
n=3, CODEPAGE 860 n=4, CODEPAGE 863 n=5, CODEPAGE 865
n=6, CODEPAGE 857 n=7, CODEPAGE 861 n=8, CODEPAGE 862
n=9, CODEPAGE 855 n=10, CODEPAGE 866 n=11, CODEPAGE 737
n=12, CODEPAGE 851 n=13, CODEPAGE 869 n=14, WINDOWS 1252
n=15, WINDOWS 1250 n=16, WINDOWS 1251 n=17, WINDOWS 1253
n=18, WINDOWS 1254 n=19, WINDOWS 1255 n=20, WINDOWS 1257
Description Set the code page.
^XSET,ERRORPRINT,n - Set Error Reprint
Syntax ^XSET,ERRORPRINT,n
Parameter
n = 0 , after ERROR relieved, print the error label again and keeps printing.
n = 1 , after ERROR relieved, will not print error label again and keeps printing.
n = 2 , after ERROR relieved , cancel print job.
Description Setup the process when error occurred.
^XSET,FEEDCUT,n - Setup feed and cut function
Syntax ^XSET,FEEDCUT,n
Parameter
n = 1 : when press feed key, printer will feed then cut label (cutter should be
enable). When uses continuous paper, the feed distance will be one label.
n = 0 : when press feed key, printer will not cut label (cutter function enable). When
uses continuous paper, printer will stop feed paper while release feed key.
Description Setup the process when error occurred.
^XSET,FEEDTYPE,n - Setup feed function
Syntax ^XSET,FEETYPE,n
Parameter n=0, Press FEED key. Printer will be printing a blank label in standby mode.
n=1, Press FEED key. Printer will be printing a previous one label in standby mode.
n=2, Press FEED key. None function in standby mode.
Description
Setup feed function
^XSET,IMMEDIATE,n - Set immediate response on/off
Syntax ^XSET,IMMEDIATE,n
Parameter n = 0, set immediate response function off (default)
n = 1, set immediate response function on
Description This command can set printer’s immediate response function on/off. To implement
commands that related to immediate response, the function should be turned on.
^XSET,KEYBOARD,n - Select different area PS2 Keyboard
Syntax ^XSET,KEYBOARD,n
Parameter n = 0 - US , 1 - UK , 2 - French , 3 - German , 4 - Spanish , 5 - Italian , 6 – Finnish ,
7 – Dutch, 8 – Belgian , 9 – Russian , 10 – Norwegian , 11 – Icelandic , 12 – Swedish
Description Change the area setting of keyboard mode.
* Note: this command is only applied on printer models that support keyboard mode.