GoDEX EZPL - Manual (Page 30)

25
~MDELn,name - Delete specific file from memory
Syntax ~MDELn,name
Parameter n = D, database
A, Asia font
C, TTF font
E, Bit-Mapped font
F, label form
G, graphic
S, serial file
T, text
B, Unicode Table
name = The name of the graphic, form, Bit-Mapped font or others.
*Note: The ‘name’ of Asia font, TTF font and Unicode Table is ID tag.
Description Delete specific file from printer’s memory
Example ~MDELD,customer Delete “customer” database.
~MDELG,Bus The graphic “Bus” will be deleted
~MDIR - Get memory state from printer
Syntax ~MDIR
Parameter None
Description Show the information of memory from printer
Example
~MGETS,name - Get Serial File information
Syntax ~MGETS,name
Parameter name = serial file name
Description Show the serial file information on Hyper Terminal
Example (Get the information of serial file “new”
from printer)
~MGETS,new
~MSETT,name<CR>nnnnnnnn<data> - Save the .TXT file to printer
Syntax ~MSETT,name<CR>nnnnnnnn<data>
Parameter name = the name of saved
nnnnnnnn = data size (8 digits)
data = data to be saved
Description Save the .TXT file to printer.