GoDEX EZPL - Manual (Page 57)

52
V#SET,THOUFORMAT,V00ab[c]
Syntax V#SET,THOUFORMAT,V00ab[c]
Parameters
a = the symbol will be displayed at Thousand point
b = the symbol will be displayed at Decimal point
c = the symbol will be displayed at End of number
Description The symbol will be displayed at Thousand point, Decimal point and End of number
Example
Send command :
^Q50,0,0
~MDELF,TEST
^FTEST
^L
V00,10,V00
V01,10,V01
V02,10,V02
V#SET,UNPROMPT,V02
V#SET,FLOATFORMAT,2,0,V02
V#SET,THOUFORMAT,V02,,,
V#OP+,V02,V00,V01
R22,14,774,378,10,10
AH,100,050,1,1,0,0,V00 = ^V00
AH,100,150,1,1,0,0,V01 = ^V01
AH,100,250,1,1,0,0,V02 = ^V02
E
^KTEST
1411.12
1333.23
~P1
E
Print result :
V00 = 1411.12
V01 = 1333.23
V02 = 2,744,35,
V#SET,UNPROMPT,x - Disable variable prompt
Syntax V#SET,UNPROMPT,x
Parameters x = variable
Description This command can set the variable without prompt.
Example V#OP+,V00,V01,V02
V#SET,UNPROMPT,V00
Use doesn’t need to input the value of V00
V#STRCPY,x,y - Copy all of variable data
Syntax V#STRCPY,x,y
Parameters x = target variable
y = source variable
Description Copy all data of y to x
Example V#STRCPY,V00,V01 Copy all of V01 data to V00