Control commands, B - display the version message, Dm,d,y,h,i,s - date/time setting – GoDEX EZPL User Manual
Page 27: En,name,size - download graphic to memory, G - graphic mode, Dm,d,y,h,i,s, En,name,size
22
Control Commands
~B - Display the version message
Syntax
~B
Parameters
None
Description
Show the version number of firmware on Hyper Terminal.
~Dm,d,y,h,i,s - Date/Time setting
Syntax
~Dm,d,y,h,i,s
Parameter
m = Month (01 to 12)
d = Date (01 to 31)
y = Year (last two digits of year)
h = Hour (00 to 23)
i = Minutes (00 to 59)
s = Seconds (00 to 59)
Description
Set real time clock of the printer. For format setting of the date, use the Daa|bb|cc
command.
Example
~D12,22,04,11,11,11
^L
Dwn
AD,182,145,1,1,0,0,^D
Dw2
AD,135,186,1,1,0,0,^D
Dw1
AD,168,226,1,1,0,0,^D
Dmn/dd/y2
AD,126,110,1,1,0,0,^D
E
The following form shows the date for December
2004.
Sun. Mon. Tue.
We.
Thu.
Fri. Sat.
1
2
3
4
5
6
7
8
9
10 11
12
13
14
15
16
17 18
19
20
21
22
23
24 25
26
27
28
29
30
31
The print result as below.
12/22/04
3
Wednesday
Wed
~En,name,size - Download graphic to memory
Syntax
~En,name,size
Parameters
n = P or p: PCX file
n = B or b: BMP file
name = Name of image (up to 20 character)
size = Size of image (bytes), maximum 512K byte.
Description
Download monochrome image onto memory. Printer will beep once after
downloaded completed. If the file name of graph is duplicated, the printer will show
“REPEAT FILE NAME”, and the download will not be accepted (refer to page75).
~G - Graphic mode
Syntax
~G
Parameter
None
Description
Set the printer to image-receiving mode. The image data is sent directly from host to
the printing buffer (refer to page74)