GoDEX EZPL - Manual (Page 40)

35
ATt,x,y,w,h,g,s,d,m,data - Print downloaded true type font
Syntax ATt,x,y,w,h,g,s,d,m,data
Parameter t = TTF type, accepted values: from A to Z
x = Hori of left-top position of text (unit: dot, 1 mm = 8 dots or 12 dots)
y = Vert of left-top position of text (unit: dot, 1 mm = 8 dots or 12 dots)
w = The width of font (8~2000 dot)
h = The height of font (8~2000 dot)
g = Space between characters (0~200 dot)
s = Font setting. It consists of 2 parts, one is rotation setting and the other is font style
setting.
The rotation setting is from 0 to 3:
0  0° 1  90° 2  180° 3  270°
The font style setting is optional setting. It includes 3 types, can be set with none,
one, two or three together:
B  Bold T  Italic U  Underline
To use UNICODE please setup as below:
E  UTF8 L  UTF16 LO H  UTF16 HI ( UTF16 characters should be end up with 4
0x00)
d = DType  0: ASCII A~Z: Unicode table
m = m = 0  width/height AspectRatio mode
m = 1  Average width mode (refer to Further Information)
data = Data to be printed
Description Print downloaded True Type Font.
Further
Information
In width/height AspectRatio mode (m = 0):
When the width (w) and the height (h) of TTF are equal, the printing result of TTF will
be exactly the same with Windows font. There is a formula to calculate the Windows
font size from TTF size:
TTFheightsize = WindowsFontsize*dpi/72
For example, if user want to print Windows font 72pt on 203dpi printer, then the
TTFheightsize = 72*203/72 = 203. And the TTFwidthsize should be equal to TTFheightsize,
which is 203. As a result, when the width and height of TTF both are 203, the printout
will be the same with Windows font 72pt.
In Average width mode (m = 1):
The height in dot is calculated the same as width/height AspectRatio mode, but the
width is the average width in dots. If width=0, a 1:1 aspect ratio font is rendered.